983A Auto Glue Dispenser Solder Paste Digital Display Epoxy Dispensing Machine

Description

Feita 983 glue dispenser machine using 0.18CV constant flow solenoid control valve,with indicator switch,adjustable air suction device up to 15 inches / mercury (Hg). Service life could be more than 12 years.
Precise control of dispensing drops and dispensing cycle;Two Controlling Modes: manual mode & semi-automatic mode. Materials could be dispensed continuously until operator release the foot pedal when it is in the manual mode.
The humanized function, simpler operation, easier coating, lineation and drop, highlight high-quality products,improve production efficiency.
The professional precise glue dispenser be used the latest digital control system,digital display, assure timing output consistently.It need to be connected to air compressor (1.5HP or above)
Feita automatic glue dispenser widely used on electronics, aviation, optics, chemistry, automobile, medical treatment, petroleum, packaging, jewelry and machinery industry.
Feature:
Digital Display
Free to set 16 kinds of ways
Foot pedal controlled.
Suck-back feature ensure no dripping.
Designed for wide range of application as EFD, I&J Fisnar.
Complete with an accessory dispensing kit.
Timer mode dispensing time 0.01-99.99 seconds.
Timer mode cycle time 0.1-9.9 seconds.
Manual mode, materials could be dispensed continuously until operator release the foot pedal.
This unit need to be connected to air compressor (1.5HP or above).
Specification:
Dispensing type: Free to set 16 kinds of ways, with dispensing time display
Manual timing dispensing: Can dispensing coating, lineation continuously
Dispensing time interval: 0.1-9.9S(automatic timing function)
Automatic Timing dispensing: 00.01S-99.99S
Minium dispensing: 0.0001 ml
Input air pressure: 10-100pSi
Output air pressure: 1-80pSi
Input voltage: AC 110V 60 Hz
Internal voltage: 24V DC
Technical parameters:
1. Dispensing type: Free to set 16 kinds of ways, with dispensing time display
2. Automatic Timing dispensing: 00.01S-99.99S
3. Manual timing dispensing: Can dispensing coating, lineation continuously
4. Minium dispensing: 0.0001 ml
5. Dispensing time interval: 0.1-9.9S(automatic timing function)
6. Input voltage: 220V±10% 50 Hz/ 110V±10% 60 Hz（220V for Europe;110V for America,etc)
7. Internal voltage: 12V DC/ 24V DC
8. Input air pressure: 10-100pSi
9. Output air pressure: 1-80pSi
10. Overall dimension: 235*225*63mm
11. Net Weight: 2.2 Kg
How to use:
1. Power Switch: putdown light on shows “On”, light off shows “Off”
2. Dispensing time display: Display setting time
3. Input air pressure pressure governor: First pull out, Reversal is lower pressure,veering is the higher pressure
4. Barometer: display range: 0-100pSi
5. Vacuum control unit: Reversal is Vacuum pumpback high, veering is the Vacuum pumpback low
6. Testing button: During testing, it can replace the foot switch
7. Dispensing time dial code button: Display setting time, adopts add andsubtract way 00.01S-99.99S
8. time interval setting dial code button: Display setting time, adopts add and subtract way 0.1S-9.9S
9. Dispensing output interface: Connect to dispensing needle cylinder.
10. Air pressure input interface: Connect to clean high pressure source
11. Dispensing way: 16 kinds of free way
12. The foot controller interface: Connect to foot switch
13. Power input socket
14. Fuse holder
Package Included:
1 x Solder Paste Liquid Controller Dropper
1 x Dispenser Stand
1 x Hand Switch
1 x Foot Switch
1 x Power Cable
1 x Air Tube to Barrel
3 x 30cc Liquid Barrels
1 x Air Tube to Air Supply
1 x Steel & Plastic Tip Needles Set